Как отключить вертикальную синхронизацию в дбд
6 июл. 2016 в 5:04
Tutorial: Disable VSync, Mute Music, Custom Graphics & More!
Introduction
Hey guys, since much of you guys are requesting most customization for the game, I am here to show you how you can customize some settings by yourself by editing the config file. I know there’s no options for Anti-Aliasing and VSync and such in the in-game’s options, but it does support them however. So let me show you. 🙂
How to edit your config file
Go to the following folder location (on Windows):
C:\Users\»Your PC name»\AppData\Local\DeadByDaylight\Saved\Config\WindowsNoEditor
In this folder you will find the file called «GameUserSettings.ini». Edit this file in Notepad or a better program like Notepad++ by right clicking on it and choosing for «Open with».
I can’t find the AppData folder?
If you don’t see the AppData folder, go to your Windows Control Panel. Then choose Large Icons in the right top and click on the Folder Options.
In the Folder Options, go to the «View» tab and under «Hidden files and folders» choose the option «Show hidden files, folders and drives». After that apply and close and you should be able to find it.
Customizing the settings
Once you open the GameUserSettings.ini file you can customize all the settings in there. I will show you what you can change (as far as I know). Always save and close the file after editing. Then when you start the game the settings should have been changed.
Adjusting Resolution
The following lines can be changed to your screen’s resolution that you want to use:
ResolutionSizeX
ResolutionSizeY
After the = replace the number with your desired resolution dimensions. So if your resolution is 1920×1080 it will have to look like this:
ResolutionSizeX = 1920
ResolutionSizeY = 1080
I didn’t change this since the game always automatically adjusts the resolution, but if you want a custom resolution you can change the values there.
Graphic settings
The following values are the graphics settings that you can customize to your likings:
sg.ResolutionQuality=100
sg.ViewDistanceQuality=0
sg.AntiAliasingQuality=0
sg.ShadowQuality=0
sg.PostProcessQuality=0
sg.TextureQuality=0
sg.EffectsQuality=0
You should keep ResolutionQuality on 100 as it’s 100%.
The other values can be changed freely to the following numbers:
0 = Low
1 = Medium
2 = High
3 = Ultra
Fullscreen/Windowed mode
True = Fullscreen
False = Windowed mode
Sound settings
You can change the following settings:
MainVolume = Pick a number between 0 and 100. 0 is muted sound, 100 is max volume.
UseHeadPhones = If you are using headphones, put it on True for best quality, but if you use Speakers or Home Surround System put it on False.
MuteMusic = If you put this on False it should mute the music in game, but it doesn’t seem to work at the moment.
Controller — Invert Y
If you want to invert Y on your controller, you can put the «InvertY» setting on «True».
Changing language
You can change the language by editing the two letters after the «Language» value.
Currently available languages:
en = English
fr = French
de = German
es = Spanish
it = Italian
Disabling VSync
If you want to disable VSync (for lower end PC’s) change the following value:
«bUseVSync». Change it to False to disable VSync or True for enabling it.
What to do if settings don’t save or get reverted after starting game
If this happens, right click on your file and choose «Properties». And then add «Attributes» select «Read Only». Apply and close and it should work. After, when you want to edit the file again disable read only again, edit, save and then repeat.
If you have any questions feel free to ask me. 😉
Как отключить вертикальную синхронизацию в дбд
Примечание: используется ТОЛЬКО для жалоб на спам, рекламу и проблемные сообщения (например, нападки, оскорбления или грубости).
© Valve Corporation. Все права защищены. Все торговые марки являются собственностью соответствующих владельцев в США и других странах. Часть географических сведений на этом сайте предоставлена geonames.org.
Политика конфиденциальности | Правовая информация | Соглашение подписчика Steam | Файлы cookie
Как убрать вертикальную синхронизацию в Dead By Daylight?
Нас интересует файл GameUserSettings. ini, открываемый обычным текстовым редактором «Блокнот». Найдите строчки bUseVSync и FrameRateLimit. В первом случае необходимо прописать атрибут =False, дабы отрубить вертикальную синхронизацию в этом Survival Horror.
Как отключить лок фпс в Dead By Daylight?
- Натыкаемся на папку с конфигурацией движка игры (к слову, UE4). Здесь необходимо открыть файл «GameUserSettings. .
- Вторая строка отвечает за лимит количества кадров. Здесь уже устанавливайте на свой вкус и цвет. .
- Собственно, вот и все.
Как убрать Лок фпс в Дбд?
Нас интересует файл GameUserSettings. ini, открываемый обычным текстовым редактором «Блокнот». Найдите строчки bUseVSync и FrameRateLimit. В первом случае необходимо прописать атрибут =False, дабы отрубить вертикальную синхронизацию в этом Survival Horror.
Как повысить FPS в Geometry Dash?
Простое решение тормозов в Geometry Dash
Установите программу WinOptimizer (скачать по прямой ссылке) и включите в ней игровой режим, который завершит бесполезные фоновые процессы во время запуска игр и повысит производительность в игре.
Где находится конфиг Дбд?
Открываем пуск и в командной строке пишем %appdata% , далее переходит на шаг назад , то есть в Appdata , далее local — Dead by Daylight — Saved — Config — WindowsNoEditor и в эту папку скидываем документ Engine , который вы скачали с заменой обязательно. Вот и все , после этого заходим в игру и тестируем.
Как убрать траву в Dead By Daylight?
Никак. Единственное, что ты можешь сделать — Jesus + Fov + Увеличенное свечение у маньяка + Wallhack mode(прорисовка в ноль).
Как снять ограничение в 60 фпс?
Перейдите в Панель управления NVIDIA > Параметры 3D > Управление параметрами 3D. Изменить значение глобального параметра Вертикальный синхроимпульс на Выключено. В принципе можно Глобальные настройки для всех игр сразу или Программные настройки для отдельного приложения из списка.
Dead By Daylight FPS Unlock, Anti-Aliasing, Widescreen, and Other Tweaks
Dead By Daylight has already been around for many years now. However, it seems that the developer hasn’t implemented some of the most requested features in the game. Some of the requested features are the anti-aliasing, widescreen feature, and FPS unlock. While there are still no in-game options to modify these features, PC players are lucky as they have an alternative option to modify the game.
So in this guide, we’ll walk you through these Dead By Daylight tweaks that you can use to unlock the FPS in the game. At the same time, you will also learn how to enable and modify the widescreen resolution, vertical sync (vsync), and more.
Getting Started
The following guides will require you to edit some of the files in the configuration folder of Dead by Daylight. You can find configuration files from this directory:
%LOCALAPPDATA%\DeadByDaylight\Saved\Config\WindowsNoEditor\
How to Uncap FPS
The maximum frame rate that you can get while playing Dead By Daylight is 144 FPS. Of course, it will also depend on your monitor if it can handle such amount of frame rate. Here’s how you can uncap the FPS of Dead By Daylight.
- Go to the configuration directory of the game.
- Find and open the file called Engine.ini .
- Add the following line of codes:
[/script/engine.engine] bSmoothFrameRate=false MinSmoothedFrameRate=5 MaxSmoothedFrameRate=144
Vsync Settings
- Go to the configuration directory of the game.
- Find and open the file called GameUserSettings.ini .
- Find the line called bUseVSync= and set your desired value. You can use true or false.
bUseVSync=false
Disable and Improve Anti-Aliasing (AA)
To disable the anti-aliasing, follow the steps below:
- Go to the configuration directory of the game.
- Find and open the file called Engine.ini .
- Add the following lines at the end of the file:
[/script/engine.streamingsettings] r.DefaultFeature.AntiAliasing=0
To improve the anti-aliasing of the game, do the following steps:
- Go to the configuration directory of the game.
- Find and open the file called Engine.ini .
- Add the following line of codes:
[/script/engine.streamingsettings] r.DefaultFeature.AntiAliasing=2 r.TemporalAACurrentFrameWeight=0.2 r.TemporalAASamples=64 r.TemporalAASharpness=0.8 r.Tonemapper.Sharpen=1
How to Enable Widescreen Resolution
Editing the resolution when playing the game is much easier than you think.
- Open Steam and go to the Library section.
- Find Dead by Daylight.
- Right-click the game and select the Properties option.
- In the Launch Option input box, put your desired resolution values.
- Launch the game normally.
Example: -resx=1920 -resy=1080
And that’s it! Does this Dead By Daylight tweak guide help you? Please let us know in the comments if you have any questions or suggestions to improve this guide.
Related Posts
Unturned – California RP Fishing Guide
August 7, 2023
Sniper Ghost Warrior 3 PC Tweaks to Improve Performance and Stability
August 22, 2023
BOOK OF HOURS PC Tweaks to Improve Performance and Stability
August 15, 2023
Disclosure
Posts on our website may contain links to an online campaign and/or online retail stores. Game N Guides may earn a small commission if you decide to purchase something from our links. For more details, follow this link.