5 Ways to Fix Boot Device Not Found in HP Computer
Sometimes, some users report that hard drive not detected or boot device not found HP laptop/desktop. This article will show you five workable ways to solve it quickly and safely.
By Cherry / Updated on September 14, 2023
Share this:
Table of Contents
- Boot Device Not Found error occurs to my HP laptop
- Why is my PC saying boot device not found?
- How to fix the «Boot Device Not Found» error in HP
- ▶ Method 1. Change boot order
- ▶ Method 2. Perform a hard reset
- ▶ Method 3. Restore BIOS default settings
- ▶ Method 4. Check hard drive
- ▶ Method 5. Rebuild MBR
Boot Device Not Found error occurs to my HP laptop
“I have an HP laptop and unfortunately I cannot start it up normally. It shows “Boot Device Not Found Please install an operating system on your hard disk (3F0) and I don’t know why and what it is. I have no idea about this error and I think I need to help what should I do when the boot device is not found HP laptop?”
The error “boot device not found” in HP is a common error that many HP users have met. It always occurs during the process of booting a computer. It may occur with different error messages, such as:
▶ “No boot device — insert boot disk and press any key.”
▶ “Boot Device Not Found. Please install an operating system in your hard disk.”
▶ “No Boot Device Found. Press any key to reboot the machine.”
▶ “No boot device is available.”Once you get those error messages, you cannot boot your operating system successfully. Well, what if you got a “boot device not found” error when you boot your HP laptop or desktop? Fortunately, this post will offer you why it happens and how to solve it in Windows 11/10/8/7.
Why is my PC saying boot device not found?
«Boot Device Not Found HP» or «No Boot Device Is Detected» means the OS can’t find the bootable hard disk or the boot sector of the hard drive. To fix the boot device not found error in HP laptop or desktop, you need to know what may cause it. And here we conclude 4 possible reasons:
✎ The hard drive you boot from is an unbootable disk or device.
✎ The bootable hard drive is corrupted or died somehow.
✎ MBR or boot sector is damaged on the bootable hard drive.
✎Virus attack.How to fix the «Boot Device Not Found» error in HP
Knowing the causes of the boot device not found in HP, you can take specific measures to fix it.
- Method 1. Change boot order
- Method 2. Perform a hard reset
- Method 3. Restore BIOS default settings
- Method 4. Check hard drive
▶ Method 1. Change boot order
First, you need to make sure that the hard drive you boot from is the right disk. If you set to boot from an unbootable device by mistake, it cannot boot successfully from the unbootable device and will give you the error message: “Boot Device Not Found.
Please install an operating system to your hard disk”. Change the boot order in BIOS and let it boot from the bootable device. If it is the boot device, and you got this error, you can do the following methods.
▶ Method 2. Perform a hard reset
When you meet the problem that no boot device is detected, you can try to perform a hard reset. A hard or forced reset erases all information in the computer memory and might restore functionality. Resetting your computer forces the system to clear and reestablish the software connections between the BIOS and the hardware. To perform a hard reset, you should do the following steps:
Step 1. Turn off the computer. Remove the computer from any port replicator or docking station.
Step 2. Disconnect all external devices from your computer, unplug the AC adapter from the computer.
Step 3. Remove the battery from the battery compartment.
Step 4. Press and hold down the Power button for about 15 seconds to drain any residual electrical charge from the capacitors that protect the memory.
Step 5. Insert the battery, and plug the AC adapter back into the computer, but do not connect any of the peripheral devices such as USB storage devices, external displays, printers, etc.
Step 6. Turn on the computer. If a start menu opens, select Start Windows Normally with arrow keys and press Enter.
If resetting the hard drive hasn’t solved your problem, you can move to the next method.
▶ Method 3. Restore BIOS default settings
To restore the BIOS default settings may fix the error “boot device not found” in HP. You can do the following steps:
Step 1. Turn off the computer and wait at least five seconds.
Step 2. Restart the computer and repeatedly press the F10 key to enter the BIOS setup menu.
Step 3. On the BIOS setup screen, press F9 to select and load the BIOS Setup Default settings.
Step 4. Press F10 to Save and Exit.
Step 5. Select Yes, then press Enter when asked Exit Saving Changes?
Step 6. Follow the prompt to restart the computer.
If the computer restart normally, you are done. If it still pops up the error message “boot device not found”, proceed to the next method.
▶ Method 4. Check hard drive
If the method above cannot solve your problem, you should consider checking your hard drive. To test a hard drive, here we highly recommend you AOMEI Partition Assistant Standard, which can help you to check partition and fix errors, or check the disk.
Here you should connect your boot drive to another Windows PC which installed AOMEI Partition Assistant. Or you can create a bootable USB with AOMEI Partition Assistant to boot your computer successfully.
Please download the freeware to see how to fix boot device not found in Windows 10 and 11.
Secure Download
Step 1. Get into the AOMEI Partition Assistant program, select your boot hard drive. Here you can right-click the boot partition, select Check Partition.
It will pop up a window where you can choose the way to check partition and fix errors.
Step 2. Or you can right-click the boot hard drive, select Surface Test.
It will run the test after you click Start.
Finally, if there is any problem on your hard drive, fix it and the boot device is not found HP problem may be solved.
▶ Method 5. Rebuild MBR
MBR is an important section on the hard drive for the proceed of booting the PC. If it has errors or is damaged, the boot device not found will happen. AOMEI Partition Assistant can help you fix MBR.
Step 1. To fix MBR, here you need to right-click the hard drive, select Rebuild MBR.
Step 2. In the pop-up window, set the type of MBR for the current OS, click OK to start rebuilding MBR.
After that, you’ll need to reboot your HP.
Final words
There are 5 different methods for solving boot device not found in HP that running Windows 11/10/8/7. AOMEI Partition Assistant is a great disk manager that can help you check the hard drive and fix errors. It is worth having. Its free edition offers you the most basic features. If you need more advanced features, such as converting disk from MBR to GPT without losing data, recovering lost data, etc., you can upgrade to the Professional Version.
Cherry · Staff Editor
Cherry is an editor of AOMEI Technology, she covers backup & restore, hard disk & partitions management, cloud files transfer, website & database backup and so on for AOMEI. She enjoys helping people find solutions to their problems. She loves traveling, cooking, reading and so on. She takes most of time with her family when she is not working.
Related Articles
A Disk Read Error Occurred in HP Computer [Solved]
If you see “A disk error occurred” in HP laptop or desktop, refer to this article to get know why this error message occurs and how to fix it effectively and actually.
When and How to Copy HP Recovery Partition to an External Drive?
Everyone likes to do things in an easy but efficient way even by using a third-party tool, copying hp recovery partition to an external drive is not an exception.
How to Format HP Laptop in Windows 10 Securely [Two Ways Included]?
Intend to format hard drive for HP laptop like Pavilion in Windows 10/7 when it won’t reset to factory settings? Learn specific HP laptop format steps using CD or USB drive.
Free Download to Try AOMEI Partition Assistant Now
The Best Windows Disk Partition Manager and PC Optimizer
Download Freeware
Trustpilot 4.9/5
При включении ноутбука HP появляется ошибка загрузки и дальше ничего не происходит.
Иногда некоторые обладатели ноутбуков фирмы HP при включении своих девайсов сталкиваются с данным сообщением. Загрузки операционной системы при этом естественно не происходит.
В данной статье мы расскажем вам что означает такое сообщение при включении ноутбука HP, а также что можно попробовать сделать самостоятельно для исправления ситуации и возвращения работоспособности устройству.
Что значит “The selected boot device failed”?
Перевод текста ошибки звучит так: Загрузка с выбранного устройства не удалась. Далее предлагается нажать клавишу “Enter”, после чего ноутбук перезапускается и все повторяется снова.
Говоря простыми словами, ноутбук не знает откуда ему начинать загрузку операционной системы. Можно сделать вывод, что имеются какие – то проблемы с жестким диском или с настройками приоритета загрузки. Но обо все по порядку.
Что делать, чтобы исправить эту проблему?
Первым делом стоит проанализировать все действия, происходящие с ноутбуком, незадолго до появления вышеописанного сообщения. Имеется в виду не падал ли он, не заливался ли жидкостью и т.д.
Проверьте не стоит ли диск в дисководе и отключите все USB устройства, включая флешки. Пробуйте включить.
Обязательно прислушайтесь нет ли посторонних звуков при включении, особенно циклически шархающих и стукающих. И много ли (более 10 секунд) проходит с момента включения ноутбука, до появления сообщения.
Если есть или было что – то из описанного выше – 99% проблема с жестким диском на механическом уровне. Потребуется его полная замена и все данные, которые были на ноутбуке, скорее всего простым путем восстановить не получится.
Если ничего из перечисленного выше с ноутбуком нет и не происходило, то попробуйте сделать следующее.
Зайти в настройки BIOS, нажатием клавиши F10 сразу при включении.
Вкладка BIOS для управления приоритетом загрузки
Далее переходите на вкладку “System Configuration” -> “Boot options”.
Проверка параметров загрузки
Если “Legacy Support” находится в положении “Disabled”, то переведите его в “Enabled”.
При этом обратите внимание чтобы в разделах ниже – UEFI Boot Order на первом месте был OS Boot Manager, а в Lagacy Boot Order – Notebook Hard Drive. Если нет – то ставим клавишами F5 и F6.
Затем нажимаем F10, соглашаемся с сохранением настроек и пробуем включать ноутбук.
Подтверждение применения настроек вводом определенного числа
Возможно при перезагрузке для применения настроек потребуется ввести определенное число и нажать “Enter”.
Если ничего не помогло, то стоит попробовать переустановить операционную систему. Не исключено, что что – то случилось с загрузчиком. Перед установкой обязательно нужно проверить жесткий диск на наличие BAD секторов, так как именно из-за их появления может перестать работать загрузчик операционной системы.
Лучшая благодарность автору — репост к себе на страничку:
Что делать с ошибкой boot device not found 3F0 на ноутбуке HP?
Данное сообщение чаще всего появляется на ноутбуках фирмы HP. В нем говорится о проблемах с загрузочным устройством с операционной системой, которым в ноутбуке является жесткий диск.
Но если ваш ноутбук отображает данное сообщение, то совсем не обязательно что вышел из строя жесткий диск, хотя и не исключено.
Первое, что стоит сделать в данной ситуации это проверить правильность настроек BIOS.
Для этого заходим в bios. На ноутбуках HP чаще всего это клавиша F10, которую нужно нажимать при включении ноутбука.
Вот так выглядит BIOS HP:
bios ноутбука HP
Заходим во вкладку “System Configuration” и выбираем “Boot Options” клавишами со стрелками.
Меню bios – system configuration
Далее находим параметр “Secure Boot” и ставим его в состояние “Disable” клавишей “Enter”.
Secure boot – Disable
Следующим шагом выбираем параметр “Clear All Secure Boot Keys” и в открывшемся поле для ввода вводим код из скобок.
Параметр “Clear All Secure Boot Keys” в биос HP
Дальше активируем параметр “Legacy Support” выставлением его в положение “Enabled”.
Legacy Support выставляем в Enabled
Последним шагом будет выставление приоритетов загрузки. На первое место нужно поставить “Notebook Hard Drive” клавишами F5 или F6.
Выставление на первое место Notebook Hard Drive в Bios
Сохраняем выполненные настройки клавишей F10 и выходим из bios.
Если это не помогло, то нужно попробовать проверить шлейфы жесткого диска.
Проверка шлейфа жесткого диска в ноутбуке HP
Во всех остальных случаях вам скорее всего понадобится замена жесткого диска.
Лучшая благодарность автору — репост к себе на страничку:
Boot Device Not Found Hp Laptop? How to Fix?
If you’re seeing an error on your HP laptop, such as ‘Boot device not found HP laptop,’ then continue reading this article as we show you how to fix this.
Windows 11/10/8/7 100% Secure
About the Author
Hot Topics in 2023
Updated by Sherly on Dec 11, 2023
When turning on your HP laptop PC, are you seeing a message saying, «Boot device not found?» There are several reasons why your HP laptop is showing this error. It could be because your HP laptop isn’t detecting the attached hard disk, your PC’s BIOS is corrupted or misconfigured, and more.
But don’t worry; continue reading this article, as EaseUS is going to tell you what causes this issue and what you should do when you see this message on your HP laptop.
How to Fix the Boot Device Not Found HP Laptop Error
With our following six fixes, you should resolve this issue in a span of a few seconds, and your HP laptop should detect your hard disk and allow you to change the boot order. Share this article to help more users whose HP laptops can’t find the boot device.
Fix 1. Run Boot Repair Automatically
If all of the above solutions don’t work, you should try out EaseUS Partition Master. It comes with a «Boot Repair» feature, which is guaranteed to fix your HP laptop not finding boot device error. This feature can solve the boot error caused by outdated drivers, boot system file issues, and wrong boot order. It is the best tool if you are not a pro in computer. Following the guide below, you can repair your boot device not found error on an HP laptop without knowing its background.
Windows 11/10/8/7 100% Secure
Step 1. Start EaseUS Partition Master after connecting the external drive/USB to your computer, go to «Bootable Media,» and click «Create bootable media.»
Step 2. Select an available USB Drive or CD/DVD and click «Create.» You can also burn the Windows ISO file to the storage media.
Step 3. Connect the created bootable drive to the new computer and reboot the computer by pressing and holding F2/Del to enter the BIOS. Then, set the WinPE bootable drive as the boot disk and press F10 to exit.
Step 4. Boot the computer again and enter the WinPE interface. Then, open EaseUS Partition Master and click «Boot Repair» under the «Toolkit» option.
Step 5: Select the system you want to repair and click «Repair.»
Step 6. Wait a moment, and you will receive an alert that the system has been successfully repaired. Click «OK» to complete the boot repair process.
After several years of R&D and researching multiple types of boot issues, EaseUS’s team has enhanced the product algorithm of the «Boot Repair» feature so that it is capable of fixing any disk-related issues.
The UI of the EaseUS Partition Master is pretty easy to use and navigate, and it repairs any issues on any computer in no time.
Windows 11/10/8/7 100% Secure
Fix 2. Change HP Laptop Boot Order
It is possible you changed the boot order recently and forgot to revert the settings back. Changing the boot order again should make your HP laptop not show the «Boot device not found?» error.
Here’s how to change the boot order:
Step 1. Restart your PC.
Step 2. Press the BIOS (F2, F8, or Del, Esc) key to open the BIOS menu.
Step 3. Open the «Boot» menu.
Step 4. Now, change the order of the booting process by selecting the hard disk you want to boot first.
Step 5. Save and exit the BIOS window.
Now your HP laptop shouldn’t show the error, but if you’re still seeing it, follow the below solution, as that should resolve it.
You May Also Like:
Fix 3. Hard Reset HP Laptop
By performing a hard reset, you clear the memory and undo any problems that are causing this issue. If you don’t know how to perform a hard reset, here’s how:
Step 1. Turn off your laptop.
Step 2. Remove all external devices from your laptop.
Step 3. Remove the battery from the laptop.
Step 4. Press and hold the power button for 15 seconds.
Step 5. Put the battery back in and turn on the computer. You shouldn’t see the issue persisting now.
There are some other links related to the boot device errors. Click them to learn more:
Fix 4. Restore BIOS Default Settings
The BIOS of your HP laptop could be malfunctioning. By restoring its settings, you can reset the BIOS, which will eliminate the problem.
Here’s how to restore the BIOS to its default settings:
Step 1. Restart your computer and open the BIOS by pressing the key that’s shown on the screen during the bootup process.
Step 2. Navigate to the «Exit» menu and select «Load Setup Defaults.»
Step 3. Select «Yes.»
Step 4. Restart your PC.
Shart these fixes to help more users by clicking the following buttons.
Fix 5. Perform the Hard Drive Symptom Test in HP Laptop/PC
By performing the hard drive symptom test, you can determine if the fault is with your drive or not. Usually, drives can get corrupted for multiple reasons, such as hot temperatures, bad sectors, viruses, and more.
The hard drive symptom test reveals if the problem is with your hard disk or due to some other reason.
Here’s how to perform the test:
Step 1. Turn off your laptop.
Step 2. Turn on your HP laptop and keep tapping the «Esc» button continuously.
Step 3. A menu will pop up. Press F2.
Step 4. Select «Symptom Tests» under the «HP PC Hardware Diagnostics UEFI» menu.
Step 5. From the list of options that you see, type the corresponding number that closely resembles your problem.
Step 6. Your HP laptop will perform a thorough test of your PC. Once it’s done, open the «Test Logs» window and review the results. You’ll see a QR code and a 24-digit number. That’s the code ID of the problem. Contact HP customer support and give them the code ID, and they’ll assist you better from that point on.
These fixes come from HP support; hence, you can trust them.
Fix 6. Fix and Rebuild MBR (CMD)
Your HP laptop’s MBR contains essential information that helps in booting the laptop successfully, and any damage could result in the «Hp laptop boot device not found» error. Therefore, you need to repair the MBR.
Here’s how to do that:
Step 1. Use a recovery drive and boot up your HP laptop.
Step 2. Choose the language, followed by the «Repair your laptop/desktop» option.
Step 3. Select «Troubleshoot» followed by «Advanced options.»
Step 4. Select «Command prompt.»
Step 5. Type and enter the command «bootrec /fixboot» followed by «bootrec /scanos.»
Step 6. After executing the above two commands, type and enter the final command «bootrec /rebuildbcd.»
Step 7. Restart your PC.
You can refer to the video from YouTube to get more details:
Why Boot Device Not Found HP Laptop
There are several reasons why you could be seeing «Boot Device Not Found» on your HP laptop. Here are a few of them:
- The wrong boot order in BIOS: the incorrect drive is selected as the primary boot device. By selecting the correct boot disk, you shouldn’t see the error.
- Hard disk connection problem: The cable that connects the hard disk to the PC could be broken or not attached properly. Replacing the cable should help, or fixing the cable properly should also help.
- Outdated or misconfigured BIOS: Outdated BIOS are highly susceptible to getting corrupted, leading to issues. You can also see «boot device not found» if your BIOS is not configured correctly.
- Corrupted bootable disk: The hard disk could be corrupted or broken, which is why you’re seeing the error.
- Damaged system or boot files: Damaged system/boot files mean the HP laptop isn’t able to detect the operating system or anything. Reinstalling Windows should help.
- Corrupted MBR/boot sector in the BIOS: The MBR of your HP laptop contains crucial data necessary for the laptop to boot successfully, and any damage could cause the «boot device not found» error.
Share this article with others to inform them of these lesser-known causes of the «Boot devices not found on HP laptop issue» so they will be aware and ready to respond if they encounter the same error on their PC.
Conclusion
We hope this article helped you eliminate the «Boot device not found» error on your HP laptop. And if you’re looking for one solution that is guaranteed to fix the issue, in that case, we’d recommend EaseUS Partition Master.
You don’t have to exert as much time or energy as you would with other solutions, and you can fix the issue without losing any data. If your friend or a family member also sees the same error on their HP laptop, share this article with them to help them!
Boot Device Not Found HP Laptop FAQs
Here are some more answers as to what causes the «boot device not found» error on your HP laptop.
1. How do you fix a 3F0 error?
Here’s how to fix a 3F0 error:
- Turn off your laptop.
- Disconnect the mouse, keyboard, and all the attached accessories.
- Remove the battery from your laptop.
- Press and hold the power button of your laptop for 10-20 seconds.
- Insert the battery and press the power button.
You shouldn’t see the 3F0 error anymore.
2. Why does my HP laptop randomly say the boot device is not found?
If you think your HP laptop is randomly throwing the error ‘boot device not found,’ in that case, the cable that connects the hard drive to the PC is damaged. Replacing the cable with a new, sturdy one should likely eliminate the issue.
3. What to do when an HP laptop says the boot device is not found?
You can try the following means to fix the boot device is not found HP error:
- Change HP Laptop Boot Order
- Hard Reset HP Laptop
- Restore BIOS Default Settings
- Perform the Hard Drive Symptom Test in HP PC
- Fix and Rebuild MBR (CMD)
Or you can use EaseUS Partition Master’s ‘Boot Repair’ feature or any of the above solutions to fix the error that’s appearing on your HP laptop.
How Can We Help You
About the Author
Sherly joined EaseUS in 2022 and she has always loved writing articles and enjoys the fun they bring. She receives professional training here, focusing on product performance and other relative knowledge. She has written over 200 articles to help people overcome computing issues.
Product Reviews
Product Reviews
TrustScore 4.7 | 49 reviews- I love that the changes you make with EaseUS Partition Master Free aren’t immediately applied to the disks. It makes it way easier to play out what will happen after you’ve made all the changes. I also think the overall look and feel of EaseUS Partition Master Free makes whatever you’re doing with your computer’s partitions easy. Read More
- Partition Master Free can Resize, Move, Merge, Migrate, and Copy disks or partitions; convert to local, change label, defragment, check and explore partition; and much more. A premium upgrade adds free tech support and the ability to resize dynamic volumes. Read More
- It won’t hot image your drives or align them, but since it’s coupled with a partition manager, it allows you do perform many tasks at once, instead of just cloning drives. You can move partitions around, resize them, defragment, and more, along with the other tools you’d expect from a cloning tool. Read More
Related Articles
- How to Format an External Hard Drive Without Losing Data [2023 New] Roxanne/2023/11/21
- SATA vs SSD: Which One to Choose [Indepth Comparison] Jean/2023/10/18
- How to Format HDD/External Hard Drive to FAT32 [Your Step-by-Step Guide Is Here] Daisy/2023/11/07
- How to Format Write Protected USB/Pen Drive [7 Ways] Tracy King/2023/11/27
Hot Topics in 2023
Get EaseUS Partition Master
Your best companion for disk partitioning, MBR to GPT/GPT to MBR conversion,even OS migration
Windows 11/10/8/7 100% Secure
